Blog

The Importance of The Conformal Coating Thickness

Conformal coating thickness is one of the most important characteristics to ensure long-term reliability of your electronics. A minimum coating thickness is essential to provide the required function of the conformal coating, but if a conformal coating application is too thick, it can actually have negative effects on your level of protection.

Which conformal coating thickness should be...

Read more

5 Tips to Detect Counterfeit Conformal Coating Products*

For decades, HumiSeal products have been considered the “gold standard” in electronics protection. As a result, it is no surprise that unscrupulous chemical manufacturers have been continuously trying to profit from this reputation through the production of copycat or counterfeit products. While imitation is considered the sincerest form of flattery, the use of counterfeit materials is a...

Read more

Optimizing Conformal Coating Flow Rates to Save Time and Money

In a previous blog “How to Save Time and Money by Measuring the Right Amount of Viscosity,” viscosity was described as critical to the conformal coating process. This post will cover some of the technical details related to coating flow rate and the significant potential for savings of both time and money for PCB manufacturers.

Read more

Alternatives to Silicone Conformal Coatings Exist

For many electronics manufacturers, the original justification for specifying a silicone coating is lost deep within the mists of time and it may be time for a re-evaluation and consideration of the question,

“Do we really need a silicone conformal coating?”

Humiseal® remains in a uniquely qualified position to help you answer this question. Unlike many coatings sources, Humiseal offers a full...

Read more

Ruggedization of Electronic Circuits? Encapsulation is One of The Best-kept Protection Secrets

While conformal coatings increase the lifetime of electronic devices by providing a thin barrier that strengthens their ability to withstand harsh environmental conditions, adhesives and encapsulants provide a significantly higher level of protection on the entire assembly.

The most common properties of adhesives and encapsulants include:

  • creating environmental seals that protect against...
Read more

4 Tips to Successfully Apply Two-Component Epoxy Adhesives

Consisting of a resin and a hardener, a two-component epoxy can be formulated to offer a wide range of mechanical, thermal and electrical properties. While mix ratios differ, they all offer the ability to cure at ambient temperatures or elevated temperatures for faster cures. Here are a few tips to help you mix and apply your two-part epoxy.

Read more

Improve Precision and Reduce Time When Removing Conformal Coatings

UV curable conformal coating materials such as HumiSeal UV40 are frequently used in military, aerospace and automotive applications due to superior resistance to chemicals and mechanical stress. These properties make them difficult to remove when rework under the coating is required.

There are products available for chemical removal of conformal coatings, but many are restricted by government...

Read more

5 Simple Steps to Eliminate Bubbles in Potting Encapsulants

Encapsulant solutions are commonly used to enhance protection of circuit boards from environmental and liquid contaminants, chemical attack, and electrical shortages. While potting materials provide many positive attributes when used to protect PCBs, sometimes other issues arise during and post application of these compounds. This blog focuses on “bubbles” forming within the encapsulant itself.

Read more

A Quick Guide to Understand IPC-CC-830B Qualification Standard

IPC CC-830 revision B is a conformal coating qualification standard mostly used by board fabricators, OEM design engineers, and coatings suppliers.  

There are two fundamental uses of this IPC standard:

  • Coatings’ performance capabilities
  • Quality consistency

In this blog, we will go over some of the specifications along with tests requirements, passing criteria, and quality characteristics.

Read more

How to Save Time & Money Measuring the Right Amount of Viscosity

The conformal coating process, like any other processes, has different variables, inputs, and outputs. In order to be able to control the results of your application (outputs), we need to fully understand how each variable affects the process. 

The importance of the variables

To get the right amount of liquid, thickness, right coverage, no contamination on keep out areas, etc., you need to...

Read more
New Call-to-action
New call-to-action

Subscribe to Blog Updates

Popular Post